TL;DR: An entryway works when three heights are right: coat hooks around 165 to 170 cm, a child or bag hook near 120 cm, and a key ledge at 90 to 110 cm. Space hooks 15 to 20 cm apart so winter coats do not fight. Steel pieces in one shared finish make a narrow hallway read as planned storage instead of accumulated hardware.
The entry is the hardest working square metre in the house, and usually the least designed. A hallway rarely has room for furniture, which is exactly why wall mounted steel earns its place there: it holds everything and stands one line deep. Here is the layout, measured.
The three heights that matter
165 to 170 cm for adult coats. High enough that a long winter coat clears the floor, low enough that nobody stretches. Mount a pair of CORE hooks here, 15 to 20 cm apart; closer and two thick jackets shove each other off.
Around 120 cm for children and bags. A hook a child can actually reach is the difference between a coat on the wall and a coat on the floor. It also takes the everyday tote so it stops living on a door handle.
90 to 110 cm for the ledge. Keys, post, sunglasses. A slim LUME ledge at hip height catches what your hands hold when you walk in, and its front lip keeps keys from sliding off.
Slim hooks for narrow halls
In a corridor every centimetre of depth counts. The AIKI hook stands 16 cm tall and only 5 cm deep, a vertical line rather than a peg, so shoulders brush past it without catching. A row of three AIKI hooks reads as a deliberate rhythm on the wall even when nothing hangs on them, which is more than most coat racks can claim.
Renting? Tape changes the answer
Both ATYP hooks ship in a screw version with anchors or a tape-mount version with a high-bond layer. For a rented flat the tape version means real storage with zero holes and a clean wall at handover; the renter guide covers what tape holds and where screws are still the right call. For family coats on a masonry wall, use the screws.
One finish, one hallway
Entries collect metal: door hardware, light switch, frame. Adding one more tone turns it into clutter. Pick a single powder coat shade for every steel piece in the hall, all five ATYP finishes, Chalk, Linen, Slate, Umber, and Graphite, run across hooks and shelves alike, so the code on the hook matches the code on the ledge exactly. The three structure darks hide scuffs from bags and sleeves better than smooth finishes; the finish guide shows each one on real steel.
What it costs to do properly
Two CORE hooks, one AIKI, and a small ledge dress a full family entry for well under two hundred euros, made to order in Slovakia in 3 to 5 weeks; in-stock standard pieces ship within 5 working days, and everything carries the two-year guarantee. Browse the living room accessories for the ledges or start a custom width through Design your own if your wall demands an exact fit.
FAQ
How high should entryway hooks be mounted?
165 to 170 cm for adult coats, around 120 cm for children and bags. Measure from the floor, not the skirting.
How far apart should coat hooks be?
15 to 20 cm. Any closer and thick coats overlap; any wider and a pair of hooks stops working as a pair.
Do tape-mounted hooks hold winter coats?
A tape-mount hook holds everyday coats and bags on a smooth solid wall. For heavy loads or rough plaster, choose the screw version with anchors.
Written by ATYP for ATYP, custom metal furniture made in Slovakia.
Design your own
